RulePumpSupply.com 
RulePumpSupply.com is a King Pumps Inc. dedicated website for Rule Pumps. King Pumps Inc. is an independent supplier of Rule Pumps' products. Trademarks, brand names and logos are the property of Rule Pumps or its affiliates and are solely used to identify their respective products. RulePumpSupply.com's goal is to make it easy for customers to purchase the featured Rule Pumps' products from KINGPUMPS.COM.

Rule Pumps 12 Volt DC non-automatic and automatic bilge pumps 360 GPH To 3800 GPH. Rule's non-automatic cartridge series bilge pumps offer traditional operation activated by a float or panel switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller if clogged with debris. Rule Pumps 12 volt DC automatic computerized bilge pumps do not require float switches. They turn on to check for water every 2-1/2 minutes. If present, it will continue to run until all the water is removed. Power use in the checking mode is minimal. Ships next business day

Bilge pumps are used to remove bilge water (the bilge is the lowest compartment inside the hull of a ship, where the two sides meet at the bottom). Fuel can mix with the bilge water, therefore, electric bilge pumps are designed to be non-sparking. Electric bilge pumps are often fitted with float switches which turn on the pump automatically when the bilge fills to a set level. Because bilge pumps can fail, a backup pump is recommended. The primary pump should be located at the lowest point of the bilge, while the secondary pump should be located somewhat higher. This activates the secondary pump only when the primary pump is overwhelmed and keeps the secondary pump free of the debris in the bilge that tends to clog the primary pump.

 

 

NON-AUTOMATIC SUMP PUMPS

Rule Pumps non-automatic cartridge series bilge pumps 360 GPH - 3800 GPH offer traditional operation activated by a float or panel switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller in the event that the pump becomes clogged with debris.
Ships next business day
 

Rule Pumps Non-Automatic Submersible Pump Data
Model GPH Amps @12v Amps @13.6v Fuse Size Height Width Weight (lbs) Hose Diameter Float Switches
24 360 2.1 2.5 2.5 3-1/2” 2-3/8” 0.5 3/4” 35-40
25D 500 1.9 2.5 2.5 3-1/2” 2-3/8” 0.5 3/4” 35-40
20F 800 2.9 4.0 5 4" 2-7/8” 1 3/4” 35-40
20A 1000 2.9 4.0 5 4" 2-7/8” 1 1-1/8” 35-40
27D 1100 3.3 5 6 4-1/4” 2-3/8” 0.75 1-1/8” 35-40
02 1500 4.8 7.0 9 6” 4-1/4” 2 1-1/8” 35-40
10 2000 8.4 12.0 15 6” 4-1/4” 2 1-1/8” 35-40
14A 3700 15.5 20.0 25 7-1/4” 4-7/8” 5 1-1/2” 40
17A 3800 15.5 20.0 25 5-1/4” 8-1/2” 5 1-1/2” -


AUTOMATIC SUMP PUMPS

Rule Pumps 12 Volt DC Automatic Bilge Pumps 500 GPH - 2000 GPH feature computerized operation on the principle of impeller resistance. Float switches are not required. The pump will turn on every 2-1/2 minutes to sense for water. If water is present, the pump will sense resistance
and continue to run until all the water is removed. Thereafter, it will check  for water every 2-1/2 minutes.Power use in the checking mode is minimal.

Ships next business day

 

Rule Pumps 12 Volt DC Automatic Submersible Pump Data
Model GPH Amps @12v Amps @13.6v Fuse Size Height Width Weight (lbs) Hose Diameter
25S 500 1.9 2.5 2.5 4” 2-3/8” 1 3/4”
27S 1100 3.3 5.0 6 4-1/2” 2-3/8” 1 1-1/8”
53S 2000 8.4 12.0 15 7-3/4" 4-3/4” 4 1-1/8”



Rule Mate Pumps 12 Volt DC Automatic Bilge Pump Data
Model GPH Amps @12v Amps @13.6v Fuse Size Ht. W. Wt. (lbs) Hose Diameter
RM500A 500 2 2.2 3 4" 5" 3/4"
RM750A 750 2.7 3.1 5 4" 5" 3/4"
RM1100A 1100 3.4 4.0 5 4" 5" 1-1/8"

 

 
Visit Our Online Store
Order Online
Website Builder